TENDA TEF1105P-4-63W switch 5x FE 4x PoE
Tenda TEF1105P-4-63W is a switch equipped with 5 fast Ethernet ports (10/100 Mbps). On ports 1-4 it has a PoE power output in the 802.3 af/at standard, the maximum power per port is 30 W, and for the whole device 58 W. The offered product is perfect for powering IP cameras, it has been equipped with an "extend" switch that changes the mode of operation. In extend mode, the bandwidth of PoE ports is 10 Mb/s, but the power range is increased, according to the manufacturer, up to 250 meters.
Key features:
- 5 10/100 Mbps fast Ethernet ports;
- 4 PoE outputs in 802.3 af/at;
- maximum output power per port - 30 W;
- maximum power output power for the whole device - 58 W;
- Extend mode - bandwidth 10 Mb/s, but PoE range increased to 250 meters.
Specification:
| TEF1105P-4-63W |
| Standards |
IEEE 802.
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
|
| Leds |
5 LEDs per port (Link/Act)
4 LEDs per PoE port
1 power led
|
| Network interface |
4 fast Ethernet ports for data transfer and PoE
10/100 Mbps
1 fast Ethernet port for data transfer
10/100 Mbps
|
| Surge protection |
6 kV |
| Switching performance |
1 Gbps |
| Packet forwarding speed |
0.744 Mp/s |
| MAC address table |
2K |
| PoE power supply |
4 PoE outputs
IEEE 802.3af/at standard
|
| Supply wires |
1, 2, 4, 5+
3, 6, 7, 8-
|
| Dimensions |
100 x 100 x 26 mm |
| Maximum power consumption |
63 TH /M |
| Permissible operating temperature |
0 to 40 °C |
| Storage temperature |
-40 to 70 °C |
| Permissible air humidity |
10%-90% non-condensing |
|
Permissible air humidity
during storage
|
5%-90% non-condensing |