e-shop

Κατηγορίες




Καλάθι αγορών  [περισσότερα]

Το καλάθι σας είναι άδειο.


TENDA PH6 Gigabit PowerLine Adapter Kit AV1000



€89,64

Προσθήκη στο καλάθι:


  • Περιγραφή
  • Λεπτομέρειες
  • Κριτικές
  • Διαθεσιμότητα

TENDA PH6 Gigabit PowerLine Adapter Kit AV1000

Tenda PH6 is a set consisting of two PLC powerlines in the HomePlugAV2 standard. The devices have 1 Gigabit Ethernet port (10/100/1000 Mb/s) and are distinguished by low own power consumption (maximum 3.2 W). They are mounted directly in an electrical outlet, without the use of additional cables.

PLC powerlines are used to transmit the Internet network via an existing electrical network. They are perfect wherever it is not possible to mount a standard Ethernet cable. The maximum theoretical bandwidth is 1000 Mbps, but it should be remembered that it is largely dependent on the quality of the electrical network.

An additional advantage is the built-in electrical outlets, to which you can connect other devices. Thanks to this, by connecting the transmitter you do not lose access to the outlet. PH6 have been pre-configured, just plug them in, no pairing required.

Key features:

  • transmission of the internet network over the existing electrical network;
  • 1 Gigabit Ethernet port 10/100/1000 Mbps;
  • HomePlugAV2 standard;
  • maximum theoretical throughput of 1000 Mb/s (depends on the quality of the electrical installation);
  • transmitters have built-in electrical sockets;
  • devices pre-configured, no need to pair.

Specification:

PH6 Kit
Maximum theoretical throughput 1000 Mbps
Standards and protocols

HomePlugAV2

802.3 IEEE

IEEE 802.3u

IEEE 802.3ab

Ethernet interface

1 Gigabit Ethernet port

10/100/1000 Mbps

Modulation

OFDM

CSMA/CA

Buttons 1x pairing / reset
Leds

1x power

1x powerline (connection via the electrical network)

1x ethernet

Power consumption

Maximum: 3.2 W

Minimum: 0.36 W

Power input

100 - 240 VAC

50/60 Hz

0.1 A

Frequency 2 - 86 MHz
Dimensions 108.5 x 61.5 x 45 mm
Composition of the set

Device

Quick Installation Guide

Patch cord

Permissible operating temperature From 0 to 40 deg.C
Storage temperature -40 to 70 deg.C
Permissible air humidity 10%-90% RH non-condensing

Permissible air humidity

during storage

5%-90% RH non-condensing
  • Μοντέλο: AFTENDAPH6
  • Κατασκευάστηκε από: Energizer
  • Βάρος αποστολής: 0.25 κιλά

Γίνε ο πρώτος που θα γράψει μια κριτική.  Γράψτε μια κριτική.



Το προϊόν αυτό προστέθηκε στον κατάλογο στις Σάββατο 25 Σεπτεμβρίου, 2021.



Content

Custom Left Slide Out

Μπορείτε να προσθέσετε οποιοδήποτε περιεχόμενο εδώ, κείμενα, εικόνες, κλπ.



your alt text here